View By Date

Tags

  • 29 Jun 2016
    Baseball collectibles always seem to be the hottest game in town, and we've got a few really interesting items to examine Sunday evening. In particular one of our vendors here at the Brass Armadillo Antique Mall in Denver has a baseball diorama, probably from the '20's or '30's, that we'll take a close look at. I've never seen one like it. We'll also consider how to sell baseball collectibles most effectively: send to auction, ebay, put out in the Mall & list in the iAntique Classifieds. For this truly rare diorama the dealer has decided to put it in her showcase in the Mall and, of course, list in the Classifieds. Watch for it--it's well worth the $850 she's asking. Hope you can tune in Sunday evening, July 3, 2016, at the usual time: 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. We always guarantee a fun time for all! Gary
    62 Posted by Gary & Carol Stover
  • Baseball collectibles always seem to be the hottest game in town, and we've got a few really interesting items to examine Sunday evening. In particular one of our vendors here at the Brass Armadillo Antique Mall in Denver has a baseball diorama, probably from the '20's or '30's, that we'll take a close look at. I've never seen one like it. We'll also consider how to sell baseball collectibles most effectively: send to auction, ebay, put out in the Mall & list in the iAntique Classifieds. For this truly rare diorama the dealer has decided to put it in her showcase in the Mall and, of course, list in the Classifieds. Watch for it--it's well worth the $850 she's asking. Hope you can tune in Sunday evening, July 3, 2016, at the usual time: 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. We always guarantee a fun time for all! Gary
    Jun 29, 2016 62
  • 27 Jun 2016
    Think Legos are just for kids? If you think Legos are just toys for kids, think again. Parents have been purchasing Legos for their kids since their release in the U.S. in 1961. In the years following, the Lego brand has developed into a highly-popular and valuable collectible for kids and adults.   Legos also bring some hefty price tags as well. For example, the “Harry Potter and the Legend of the Order of the Phoenix Castle Set (Lego #5378) sold in 2007 for $89.99. It has since been retired and prices now range from $225 to $560. That’s a pretty astounding increase in value if you think about it! The demand for Legos is increasing at an all-time high. Naturally, the more rare and added desirability as with anything, the higher the value. If you have any doubts about desirability of Legos, check out an online price and investment website for LEGO collectors called “Brick Pickers”. There is also a wonderful resource book titled “The Ultimate Guide to Collectible LEGO Sets”. It features the most collectible Legos on the secondary market as well as pricing, and a ton of great information. Here’s some food for thought: Lego is now the world’s largest toy company!  
    58 Posted by Betty Jean Shearin
  • Think Legos are just for kids? If you think Legos are just toys for kids, think again. Parents have been purchasing Legos for their kids since their release in the U.S. in 1961. In the years following, the Lego brand has developed into a highly-popular and valuable collectible for kids and adults.   Legos also bring some hefty price tags as well. For example, the “Harry Potter and the Legend of the Order of the Phoenix Castle Set (Lego #5378) sold in 2007 for $89.99. It has since been retired and prices now range from $225 to $560. That’s a pretty astounding increase in value if you think about it! The demand for Legos is increasing at an all-time high. Naturally, the more rare and added desirability as with anything, the higher the value. If you have any doubts about desirability of Legos, check out an online price and investment website for LEGO collectors called “Brick Pickers”. There is also a wonderful resource book titled “The Ultimate Guide to Collectible LEGO Sets”. It features the most collectible Legos on the secondary market as well as pricing, and a ton of great information. Here’s some food for thought: Lego is now the world’s largest toy company!  
    Jun 27, 2016 58
  • 27 Jun 2016
    I'm looking for a photograph of the wife of Wyatt Earp that is huge and would probably still be in a frame matching the frame in this photo of Wyatt. His wife's photograph was advertised for sale in Wisconsin in the early 2000's, but we've lost track of it since then. Marshall & I would be willing to pay a substantial sum for the photo, itself, and would be willing to pay $500 to the first person who can give us a copy of that ad. As stated in our ad, both photos were sold at an auction in Manitowoc, Wisconsin in 1990. Thanks for any help. Gary
    26 Posted by Gary & Carol Stover
  • I'm looking for a photograph of the wife of Wyatt Earp that is huge and would probably still be in a frame matching the frame in this photo of Wyatt. His wife's photograph was advertised for sale in Wisconsin in the early 2000's, but we've lost track of it since then. Marshall & I would be willing to pay a substantial sum for the photo, itself, and would be willing to pay $500 to the first person who can give us a copy of that ad. As stated in our ad, both photos were sold at an auction in Manitowoc, Wisconsin in 1990. Thanks for any help. Gary
    Jun 27, 2016 26
  • 23 Jun 2016
    I've got some stories to tell you Sunday evening. There's the story about a painting that was purchased by the first Senator from Wyoming for his daughter to give to a friend. That painting was subsequently donated to a hospital in Cheyenne, Wyoming that was dedicated to the Senator's daughter, who, by the way was married to Black Jack Pershing and who was killed in a fire at the Presidio in San Francisco while Pershing was looking for Poncho Villa in Mexico. There's another story about a man from Brooklyn who was aboard the Enola Gay when it dropped the atomic bomb on Hiroshima--an unlikely hero who just happened to take the photo of the mushroom cloud. Then there's the story of an artist in Denver, Colorado who was a friend of Sharon Tate, Abigail Folger, and Roman Polanski. A man who, by the merest chance wasn't on Cielo Drive the night of the Manson murders. A man who had painted a picture in Abigail Folger's apartment that ended up being found in 2015 at an estate sale by a man who was a friend of Sharon & Abigail. There's the story of a woman who was standing in Dealey Plaza on November, 22, 1963 and when the Presidential limosine was about 10 feet away from her she took a photo of the President & Jackie at the exact moment of the fatal head shot. Oh, and in the background of that photo was "The Grassy Knoll." Then there's the story of finding Harry S. Truman's poker table in a basement in Denver a couple of years ago. So many stories! So many more stories yet to be told. These are just some of the stories to be found in the iAntique Video Archive. Who wouldn't want to be in this business? Please join us this coming Sunday evening, June 26, 2016 for this week's show. We're on at 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. Gary
    81 Posted by Gary & Carol Stover
  • I've got some stories to tell you Sunday evening. There's the story about a painting that was purchased by the first Senator from Wyoming for his daughter to give to a friend. That painting was subsequently donated to a hospital in Cheyenne, Wyoming that was dedicated to the Senator's daughter, who, by the way was married to Black Jack Pershing and who was killed in a fire at the Presidio in San Francisco while Pershing was looking for Poncho Villa in Mexico. There's another story about a man from Brooklyn who was aboard the Enola Gay when it dropped the atomic bomb on Hiroshima--an unlikely hero who just happened to take the photo of the mushroom cloud. Then there's the story of an artist in Denver, Colorado who was a friend of Sharon Tate, Abigail Folger, and Roman Polanski. A man who, by the merest chance wasn't on Cielo Drive the night of the Manson murders. A man who had painted a picture in Abigail Folger's apartment that ended up being found in 2015 at an estate sale by a man who was a friend of Sharon & Abigail. There's the story of a woman who was standing in Dealey Plaza on November, 22, 1963 and when the Presidential limosine was about 10 feet away from her she took a photo of the President & Jackie at the exact moment of the fatal head shot. Oh, and in the background of that photo was "The Grassy Knoll." Then there's the story of finding Harry S. Truman's poker table in a basement in Denver a couple of years ago. So many stories! So many more stories yet to be told. These are just some of the stories to be found in the iAntique Video Archive. Who wouldn't want to be in this business? Please join us this coming Sunday evening, June 26, 2016 for this week's show. We're on at 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. Gary
    Jun 23, 2016 81
  • 15 Jun 2016
    I get more questions about how to tell whether a picture under glass is original or a print than all other questions I receive combined. It's very easy to figure it out, and as a dealer, knowing how to do it is probably worth more to you than any other thing you can learn. So, in this week's show we'll discuss not only how to determine whether a picture is original or not, but also how to know if an original work is a watercolor, a gouache, or a pastel. I've selected 5 watercolors, 3 gouaches, and a pastel to demonstrate not only which medium they are, but also to get at values for each of the 9 works. We'll look at 2 watercolors by Charles Henry Reinike, 1 by Terri McNichol, 1 by Herndon Davis, and 1 by Frank Howell; 2 gouaches by Gerry Metz and 1 by Richard Pannett; and a gorgeous pastel by Elsie Haddon Haynes. Hope you can join us at the usual time, this Sunday evening, June 19, 2016 at 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. Gary
    108 Posted by Gary & Carol Stover
  • I get more questions about how to tell whether a picture under glass is original or a print than all other questions I receive combined. It's very easy to figure it out, and as a dealer, knowing how to do it is probably worth more to you than any other thing you can learn. So, in this week's show we'll discuss not only how to determine whether a picture is original or not, but also how to know if an original work is a watercolor, a gouache, or a pastel. I've selected 5 watercolors, 3 gouaches, and a pastel to demonstrate not only which medium they are, but also to get at values for each of the 9 works. We'll look at 2 watercolors by Charles Henry Reinike, 1 by Terri McNichol, 1 by Herndon Davis, and 1 by Frank Howell; 2 gouaches by Gerry Metz and 1 by Richard Pannett; and a gorgeous pastel by Elsie Haddon Haynes. Hope you can join us at the usual time, this Sunday evening, June 19, 2016 at 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT. Gary
    Jun 15, 2016 108
  • 12 Jun 2016
    Tent Sale may be ending tonight, but the Brass Armadillo fun isn't over-- join us for the stream in an hour! First, at 6PM MST, Gary has another selection of Bargains in the Mall. Next, Reel Design (reluctantly?!) views The Boy Friend. Then, Bottles, Relics & Junkets brush up on their History of Wyoming License Plates.. Finally, we have Friday's Coffee Club. All of this starts Sunday Night at 6PM. Tune in by clicking the link below! http://www.iantique.com/live/ Also, have you missed a show? Check out the iAntique Video Archive to see any of our past events and webcasts! http://www.iantique.com/videos
    114 Posted by Denver Brass Armadillo
  • Tent Sale may be ending tonight, but the Brass Armadillo fun isn't over-- join us for the stream in an hour! First, at 6PM MST, Gary has another selection of Bargains in the Mall. Next, Reel Design (reluctantly?!) views The Boy Friend. Then, Bottles, Relics & Junkets brush up on their History of Wyoming License Plates.. Finally, we have Friday's Coffee Club. All of this starts Sunday Night at 6PM. Tune in by clicking the link below! http://www.iantique.com/live/ Also, have you missed a show? Check out the iAntique Video Archive to see any of our past events and webcasts! http://www.iantique.com/videos
    Jun 12, 2016 114
  • 19 Jul 2010
    Here is  a Slight history on insulators, pertains mainly to the glass variety, to see a full history please feel free to visit http://www.nia.org/timeline/index.htm where I found the following facts from. May 24, 1844:  Samuel Morse transmitted the first telegraph message over a short telegraph line run along a railroad between Washington, D.C. and Baltimore with the famous words "What hath god wrought!".  Based on advice from Ezra Cornell, the insulators used on this line were made of two flat glass plates surrounding a cloth wrapped wire in slot in the crossarm. April 18, 1846: Royal E. House of New York, NY patent for a telegraph that prints characters to be decoded titled "The Magnetic Letter Printing Telegraph".  The idea was different enough from Morse's design to avoid infringement.  An unusual metal and glass insulator was developed uniquely for the House telegraph.  (US Patent 4,464) July 24, 1846:  Addison Smith of Perrysburg, OH patent for a fire detector and alarm system using telegraph to transmit information.  (US Patent 4,661) April 5, 1848:  Ralph Gray and Robert Hemingray signed a five year lease for a small half-lot on Hammond Street (originally known as  Mayor's Alley from Third to Fourth, between Main and Sycamore) in Cincinnati, Ohio.  They soon began manufacturing glass at this location under the name of Gray & Hemingray Glass Works. February 5, 1850:  James Spratt of Cincinnati, OH patent for a lightning rod insulator design.  This patent was implemented in an early LRI (Lightning Rod Insulator).  (US Patent 7,076) October 14, 1851:  John Yandell of  St. Louis, MO  patent for a glass block insulator.  A good example of this CD 1014 insulator exists in the Smithsonian Institution archives.  (US Patent 8,438) -- [Full Patent Text] March 29, 1859:  Russel Hickok of Fort Edward, NY patent for a glass lightning rod insulator design.  Link for more details! (US Patent 23,373) -- [Full Patent Text] August 5, 1861: The Transcontinental Telegraph, which connected St. Joseph, Missouri and Sacramento, was completed by the Western Union Telegraph Co. and its associates.  In 1869 this line was rerouted to follow the Transcontinental Rail Road July 25, 1865:  This important patent was by Louis Cauvet for the a method of forming internal threads an insulators to allow them to screw onto a threaded pin.  Previous insulators were threadless and held on the pin by friction. Brookfield was the first to license this patent.  (US Patent 48,906) -- [Full Patent Text] December 19, 1871:  Robert Hemingray patent for a technique for molding glass insulators.  This patent was used on a very large variety of insulators.  (US Patent 122,015) -- [Full Patent Text] -- (Additional Patent Image) January 23, 1872:  Chester H. Pond of Cleveland, OH patent for a threaded wooden insulator with a metal cap.  Several excellent examples of these insulators can be found in the Smithsonian archives.  (US Patent 122,961) -- [Full Patent Text] February 6, 1877:  Paul Seiler patent to provide six longitudinal ribs to both strengthen the insulator without adding weight and reduce the contact area with the tie wire.  This patent was implemented in CD 130.2.  (US Patent 187,183) -- [Full Patent Text] January 14, 1879:  James M. Brookfield design patent for the CD 102 "pony" style insulator.  (US Design Patent 10,981) -- [Full Patent Text] September 13, 1881:  Samuel Oakman patent for a process of forming threads on an insulator by plunging a previously formed (and cool) threaded glass cup into the molton glass in the mold.  The glass would cool enough as to not overly distort the threaded cup.  This technique was used by the American Insulator Co. on many of their insulators as well as some unembossed pieces and a CD 134 marked with just the patent.  This is the reason that many of these pieces have poorly defined or somewhat distorted threads, as the glass cup would soften in the molton glass.  (US Patent 247,100) -- [Full Patent Text] May 1, 1883:  Joseph S. Lewis patent for an external thread above the wire groove to allow the insulator to be "screwed in" to a tie wire.  a damaged insulator could also be replaced without undoing the tie wire.  The patent drawing shows the threading to be in the same direction as a normal insulator's internal threads, making one loosen it on the pin to attach the tie wire (Not a desirable function).  Frank Pope's patent later this same year (Dec. 25, 1883) is for virtually the same design, only threaded in the opposite direction.  Both patents appear on the National Insulator "Corkscrew" styles CD 110.5 and 110.6.  (US Patent 276,839) -- [Full Patent Text] August 14, 1883:  Homer Brooke, of Jersey City, NJ patent for an insulator press.  This patent was implemented on a number of Brooke's insulators including CD 120 and 133.1 and it is likely that this is the "patent applied for" on a number of other styles attributed to Homer Brooke including CD 120.2 and CD 125. Thanks to Bob Stahr for providing this data originating from Dick Roller who put together a great reference data base. (US Patent 283,321) -- [Full Patent Text] -- Link to additional Homer Brooke information. October 16, 1883:  Bradley A. Fiske and Samuel D. Mott patent for diamond shaped indentations in the wire groove to reduce electrical contact with the tie wire.  This patent was implemented in both CD 135 and CD 109.  (US Patent 286,801) -- [Full Patent Text] December 25, 1883:  Frank L. Pope patent for external threads opposed to the internal to allow the replacement of a broken insulator without disturbing the tie wire.  This patent was implemented in CD 110.5 and CD 110.6. (US Patent 290,922) -- [Full Patent Text] June 24, 1886:  The pottery & Glassware Reporter was informed by Mr. E. A. Leonard that the Leonard Glass Works of Detroit, Mich., has closed down and may not be reopened August 17, 1886:   John O'Brian of New York, NY patent for a unique insulator design assigned to William Brookfield.   This patent was implemented in the Brookfield CD 119 insulators, although the embossing provides the wrong patent date.   (US Patent 347,635) -- [Full Patent Text] November 23, 1886:  Robert G. Brown of Brooklyn, NY assigned to the E.S.Greeley & Co. patent for an insulator and pin to allow mounting below the crossarm.  This design could double the number of circuits supported by a single crossarm or be used to facilitate wire transposition.  This patent style is known as the "Brown Pony" and was implemented in CD 187 & CD 188 as well as U-81, U-82, U-84 and U-85.  (US Patent 353,120) -- [Full Patent Text] November 8, 1887:  Francis H. Soden and Henry Goehst patent for a strain insulator for electric lights.  This patent was implemented in the CD 1129 glass strain. (US Patent 372,940) -- [Full Patent Text] June 17, 1890:  Samuel Oakmen patent for the ears found on cable insulators - CD 258, CD 259, and CD 260 match closely the patent drawings.  (US Patent 430,296) -- [Full Patent Text] August 19, 1890:  Samuel Oakman for a skirt projection to act as a water stop as well as threading the inside of the inner skirt to increase the leakage distance.  This was implemented in CD 258, CD 259, and CD 260.  (US Patent 434,879) -- [Full Patent Text] December 23, 1890:  Foree Bain patent for grooves inside and outside the insulator surface for the dual purpose of increasing leakage distance.   This has been implemented on CD 144.  This patent was assigned to the Hemingray Glass Company on February 28th, 1901. (US Patent 443,187) -- [Full Patent Text] February 1891:  Pass and Seymour of Syracuse, NY starts making threaded porcelain "wet process" insulators.  The only known existing style they made is U-146, although they also catalogued U-141.  Sometime in 1895 or 1896 they stopped making pintype insulators. May 2, 1893: Ralph G. Hemingray patented drip points.  The intent was to provide a point for moisture to accumulate and more quickly drip off the insulator keeping it dryer.  This date is considered significant as drip points were so widely implemented.  (US Patent 496,652) -- [Full Patent Text] August 29, 1893:  George W. Blackburn of Palmyra, NJ patented an insulator design using a bail clamp to hold the conductor wire.  This patent was implemented in CD 141.6 (US Patent 504,059) -- [Full Patent Text] August 14, 1894:  George H. Winslow of Pittsburgh Pennsylvania patent for a unique series of oil cup insulators for high voltage use.  This patent appears to have been implemented in several rare insulator styles including  CD 180, CD 180.1 and CD 244.  (US Patent 524,659) -- [Full Patent Text] -- (Additional Patent Image). September 25, 1894:  David N. Osyor patent for a pin and insulator combination that was assigned to the Jeffery Mfg. Co.  This was implemented in the CD 185 Mine insulator and porcelain U-89 through U-98B.  (US Patent 526,498) -- [Full Patent Text] 1895: The first underground trolley system in the United States is constructed in Boston, MA.  This system used relatively low voltage DC which required very large copper cables.  The CD 140 "Jumbo" was designed for this line. September 3, 1895:  Danial Rothenberger patent for a unique cable style insulator with a hole through the crown perpendicular to the tie wire.  This patent was implemented in the rare Brookfield CD 268.  (US Patent 545,819) -- [Full Patent Text] February 12, 1896: "China Glass & Lamps" reports the new glass works being erected at Westport, Md., by the Baltimore Glass Mfg. Co., is nearing completion.  Later reports show production started by the end of March making Screw cap ware, fruit jars and electrical supplies. -- Their insulators are marked B.G.M.Co. and are mostly found in purple glass. April 7, 1896:  Hannibal W. Rappleye patent for a bail-clamp tie arrangement to hold the conductor.  This patent was implemented by Brookfield in the rare CD 134.6 (US Patent 557,881) -- [Full Patent Text] September 28, 1897:  Fred Locke patent for a power insulator with an oblong shape and side troughs to direct water away from splashing on the crossarm.  This patent was implemented in the U-937 insulators that Locke had Imperial Porcelain make for use on the Niagara to Buffalo power line.  (US Patent 590,806) -- [Full Patent Text] March 8, 1898:  John W. Boch patent for a three piece porcelain power insulator where the three shells were fused together with extra glaze.  This was implemented in the Classic Thomas styles U-928 and U-928A.  (US Patent 600,475) -- [Full Patent Text] June 7, 1898:  Ralph D. Mershon of Colorado patent covering a power insulator design with a far extended inner petticoat and ridges on the top skirt to direct water off the insulator.  This patent was implemented in CD 288 and CD 298 as well as U-938, U-944 and U-945.  (US Patent 605,256) -- [Full Patent Text] September 3, 1898: A British patent by Daniel Sinclair and William Aitken both of Oxford Court, London patent for a two part dry spot insulator implemented in U-1925,U-1929, and U-1929A. (UK Patent 25,816 of 1897) -- [Full Patent Text] September 19, 1899:  Frederick H. Withycombe of Montreal, Canada patent  for a various ridge designs on the outside of an insulator to provide a "cushion" to damage from projectiles (ie: thrown rocks).  This first patent illustrates horizontal ridges.  He released four very similar Letters Patents and two design patents for virtually the same ideas.    Horizontal ridges are found on a number of Canadian CD 143's.  (US Patent 633,173) -- [Full Patent Text] 1900:  An eight mile elevated section of Boston's transit system was constructed.  Heavy DC cables were required and this line used CD 267 and CD 267.5 insulators without tie wires.  The weight of the cable was sufficient to hold it in place below  the tracks. June 10, 1902:  Vernon G. Converse patent for a stacking insulator.  This patent was implemented in the amazing glass insulator comprising CD 317.8, two CD 313 sleeves, and one CD 313.1 sleeve.  (US Patent 701,847) -- [Full Patent Text] April 7, 1903:  Ferdinand W. Gregory of New York, NY patent for a square wire groove providing extra support for the conductor.  This was implemented on the scarce Brookfield CD 159.    (US Patent 724,848) -- [Full Patent Text] May 19, 1903:  Fred M. Locke patent for the design of the M-2795 insulator.  (US Patent 728,805) -- [Full Patent Text] November 17, 1903:  Edward F. Schoethaler of Longbranch, NJ patent for a unique insulator design.  The drawings look very similar to the recently found "Spaceman" CD - The intent was to provide extra protection from a wire coming undone which may indicate that this idea influenced  the rare CD 139 Brookfield "Combination Safety" insulator.  (US Patent 744,631) -- [Full Patent Text] April 26, 1904: Scott Cutter patents the unusual CD 1038 glass Cutter tree insulator. (US Patent 758,175) -- [Full Patent Text] March 24, 1908:  Leonard W. Storror of San Francisco, CA patent for an insulator with an insert to improve insulation by making a better barrier to moisture.  This was implemented in the Brookfield CD 211 "No Leak" insulator.  (US Patent 882,803) -- [Full Patent Text] April 6, 1909: Charles E. Eveleth of Schenectady, NY patent for a porcelain power insulators with skirt grooves to allow pieces to break off if hit by a projectile preventing the loss of the whole insulator.  This patent was implemented in the rare M-2202 and M-2202A porcelain power insulators.  (US Patent 917,031) -- [Full Patent Text] March 19, 1910: The Hemingray Glass Company received Trade Mark No. 79,096: “HEMINGRAY” for use on ‘electric, telegraph, telephone, cable, street-railway, and floor insulators and break-knobs of glass.’ It was noted that the trade mark had been in use for 10 years.  Link for additional Hemingray information. January 16, 1912:  John Hilliard Jr. and Charles E. Parsons of Glens Falls, NY patent for a unique rigid suspension insulator made with multiple insulating shells mounted on a rod with two metal ends.  This is quite likely the patent for the recently found suspension insulators made from five CD 314 Hemingray shells.  (US Patent 1,015,229) -- [Full Patent Text] August 11, 1914:  Benjiman S. Purkey of Tacoma, WA patent for a twist lock "No Tie" porcelain insulator.  This patent is implemented in U-186.  Although unmarked, the recently discovered CD 207.5 may also have been made to this patent.  (US Patent 1,107,111) -- [Full Patent Text] Sept. 18, 1917:  Louis Fort of Jersey City, N.J. patent for a porcelain and metal two piece clamp insulator for street light drops.  These unusual insulators were made in brown porcelain with a cast metal clamp and mounting. (US Patent 1,240,330) -- [Full Patent Text] February 26, 1929:  Rufus Gould of New York, NY patent for a dry spot insulator assigned to the Postal Telegraph Co.  This patent was implemented in Whitall Tatum CD 182 and porcelain styles U-173, U-174, and U-175.  It called for a large inner skirt gap where the drop wire could be potted to keep wetness out.  (US Patent 1,703,853) -- [Full Patent Text] April 9, 1929:  Leon T. Wilson of East Orange, NJ assigned to A.T.& T. CO.  patent for a low loss glass insulator design.  This patent was implemented in Whitall Tatum CD 176 and the recently discovered Hemingray version CD-176.5.  (US Patent 1,708,038) -- [Full Patent Text] June 22, 1937:  Bentley A. Plimpton of Victor, NY patent for a porcelain high voltage insulator with additional petticoats and flanges.  This patent was implemented in the porcelain "Hi-Top" series of insulators (U-782 through U-805) as well as glass styles CD 220 and CD 221.  (US Patent 2,084,866) -- [Full Patent Text] November 16, 1937: Donald H. Smith assigned to the Western Union Telegraph Co. patent for a metal insulator shield to go around the base of a CD 154 style insulator.  I have seen these in use on Canadian dominion CD 154's.  (US Patent 2,099,540) -- [Full Patent Text] July 11, 1939:  H.H. Wheeler assigned to Western Union Telegraph Co.  patent for a low loss telegraph insulator.  This patent was implemented in CD 122.4 by Corning and Hemingray.  Of more interest, this patent covers the carnival glass coating used on many of the telegraph styles including the CD 118, 142 and 142.4.  It states that the coating increased the surface resistance of the insulator, thereby improving its performance in damp weather. (US Patent 2,165,773) -- [Full Patent Text] October 15, 1940:  D.H. Smith of the Western Union Telegraph Co. patent for a threaded rubber insulator.  This patent was implemented in the smaller Continental Rubber Works insulators.  (US Patent 2,218,497) -- [Full Patent Text] January 8, 1946:  Alwin G. Steinmayer of Milwaukee, WI patent for a combination insulator and spark gap arrestor.  This patent was assigned to the Line Material Company and was implemented in Hemingray insulator CD 186.1 and CD 186 and CD 186.2 were likely similar experimental pieces.  (US Patent 2,392,342) -- [Full Patent Text] November 30, 1948:  Rogers Case patented a mid-span transposition bracket as used with the Owens Illinois CD 1049 insulators.  (US Patent 2,455,229) -- [Full Patent Text] October 30, 1962:  William F. Markley and James L. Slater patent covering the design of several insulator styles made of rubber.  This patent was assigned to the Western Union Telegraph Co.  Several styles made by the Continental Rubber Works match this patent.  (US Patent 3,061,667) -- [Full Patent Text]
    135060 Posted by Christina Errington
  • Here is  a Slight history on insulators, pertains mainly to the glass variety, to see a full history please feel free to visit http://www.nia.org/timeline/index.htm where I found the following facts from. May 24, 1844:  Samuel Morse transmitted the first telegraph message over a short telegraph line run along a railroad between Washington, D.C. and Baltimore with the famous words "What hath god wrought!".  Based on advice from Ezra Cornell, the insulators used on this line were made of two flat glass plates surrounding a cloth wrapped wire in slot in the crossarm. April 18, 1846: Royal E. House of New York, NY patent for a telegraph that prints characters to be decoded titled "The Magnetic Letter Printing Telegraph".  The idea was different enough from Morse's design to avoid infringement.  An unusual metal and glass insulator was developed uniquely for the House telegraph.  (US Patent 4,464) July 24, 1846:  Addison Smith of Perrysburg, OH patent for a fire detector and alarm system using telegraph to transmit information.  (US Patent 4,661) April 5, 1848:  Ralph Gray and Robert Hemingray signed a five year lease for a small half-lot on Hammond Street (originally known as  Mayor's Alley from Third to Fourth, between Main and Sycamore) in Cincinnati, Ohio.  They soon began manufacturing glass at this location under the name of Gray & Hemingray Glass Works. February 5, 1850:  James Spratt of Cincinnati, OH patent for a lightning rod insulator design.  This patent was implemented in an early LRI (Lightning Rod Insulator).  (US Patent 7,076) October 14, 1851:  John Yandell of  St. Louis, MO  patent for a glass block insulator.  A good example of this CD 1014 insulator exists in the Smithsonian Institution archives.  (US Patent 8,438) -- [Full Patent Text] March 29, 1859:  Russel Hickok of Fort Edward, NY patent for a glass lightning rod insulator design.  Link for more details! (US Patent 23,373) -- [Full Patent Text] August 5, 1861: The Transcontinental Telegraph, which connected St. Joseph, Missouri and Sacramento, was completed by the Western Union Telegraph Co. and its associates.  In 1869 this line was rerouted to follow the Transcontinental Rail Road July 25, 1865:  This important patent was by Louis Cauvet for the a method of forming internal threads an insulators to allow them to screw onto a threaded pin.  Previous insulators were threadless and held on the pin by friction. Brookfield was the first to license this patent.  (US Patent 48,906) -- [Full Patent Text] December 19, 1871:  Robert Hemingray patent for a technique for molding glass insulators.  This patent was used on a very large variety of insulators.  (US Patent 122,015) -- [Full Patent Text] -- (Additional Patent Image) January 23, 1872:  Chester H. Pond of Cleveland, OH patent for a threaded wooden insulator with a metal cap.  Several excellent examples of these insulators can be found in the Smithsonian archives.  (US Patent 122,961) -- [Full Patent Text] February 6, 1877:  Paul Seiler patent to provide six longitudinal ribs to both strengthen the insulator without adding weight and reduce the contact area with the tie wire.  This patent was implemented in CD 130.2.  (US Patent 187,183) -- [Full Patent Text] January 14, 1879:  James M. Brookfield design patent for the CD 102 "pony" style insulator.  (US Design Patent 10,981) -- [Full Patent Text] September 13, 1881:  Samuel Oakman patent for a process of forming threads on an insulator by plunging a previously formed (and cool) threaded glass cup into the molton glass in the mold.  The glass would cool enough as to not overly distort the threaded cup.  This technique was used by the American Insulator Co. on many of their insulators as well as some unembossed pieces and a CD 134 marked with just the patent.  This is the reason that many of these pieces have poorly defined or somewhat distorted threads, as the glass cup would soften in the molton glass.  (US Patent 247,100) -- [Full Patent Text] May 1, 1883:  Joseph S. Lewis patent for an external thread above the wire groove to allow the insulator to be "screwed in" to a tie wire.  a damaged insulator could also be replaced without undoing the tie wire.  The patent drawing shows the threading to be in the same direction as a normal insulator's internal threads, making one loosen it on the pin to attach the tie wire (Not a desirable function).  Frank Pope's patent later this same year (Dec. 25, 1883) is for virtually the same design, only threaded in the opposite direction.  Both patents appear on the National Insulator "Corkscrew" styles CD 110.5 and 110.6.  (US Patent 276,839) -- [Full Patent Text] August 14, 1883:  Homer Brooke, of Jersey City, NJ patent for an insulator press.  This patent was implemented on a number of Brooke's insulators including CD 120 and 133.1 and it is likely that this is the "patent applied for" on a number of other styles attributed to Homer Brooke including CD 120.2 and CD 125. Thanks to Bob Stahr for providing this data originating from Dick Roller who put together a great reference data base. (US Patent 283,321) -- [Full Patent Text] -- Link to additional Homer Brooke information. October 16, 1883:  Bradley A. Fiske and Samuel D. Mott patent for diamond shaped indentations in the wire groove to reduce electrical contact with the tie wire.  This patent was implemented in both CD 135 and CD 109.  (US Patent 286,801) -- [Full Patent Text] December 25, 1883:  Frank L. Pope patent for external threads opposed to the internal to allow the replacement of a broken insulator without disturbing the tie wire.  This patent was implemented in CD 110.5 and CD 110.6. (US Patent 290,922) -- [Full Patent Text] June 24, 1886:  The pottery & Glassware Reporter was informed by Mr. E. A. Leonard that the Leonard Glass Works of Detroit, Mich., has closed down and may not be reopened August 17, 1886:   John O'Brian of New York, NY patent for a unique insulator design assigned to William Brookfield.   This patent was implemented in the Brookfield CD 119 insulators, although the embossing provides the wrong patent date.   (US Patent 347,635) -- [Full Patent Text] November 23, 1886:  Robert G. Brown of Brooklyn, NY assigned to the E.S.Greeley & Co. patent for an insulator and pin to allow mounting below the crossarm.  This design could double the number of circuits supported by a single crossarm or be used to facilitate wire transposition.  This patent style is known as the "Brown Pony" and was implemented in CD 187 & CD 188 as well as U-81, U-82, U-84 and U-85.  (US Patent 353,120) -- [Full Patent Text] November 8, 1887:  Francis H. Soden and Henry Goehst patent for a strain insulator for electric lights.  This patent was implemented in the CD 1129 glass strain. (US Patent 372,940) -- [Full Patent Text] June 17, 1890:  Samuel Oakmen patent for the ears found on cable insulators - CD 258, CD 259, and CD 260 match closely the patent drawings.  (US Patent 430,296) -- [Full Patent Text] August 19, 1890:  Samuel Oakman for a skirt projection to act as a water stop as well as threading the inside of the inner skirt to increase the leakage distance.  This was implemented in CD 258, CD 259, and CD 260.  (US Patent 434,879) -- [Full Patent Text] December 23, 1890:  Foree Bain patent for grooves inside and outside the insulator surface for the dual purpose of increasing leakage distance.   This has been implemented on CD 144.  This patent was assigned to the Hemingray Glass Company on February 28th, 1901. (US Patent 443,187) -- [Full Patent Text] February 1891:  Pass and Seymour of Syracuse, NY starts making threaded porcelain "wet process" insulators.  The only known existing style they made is U-146, although they also catalogued U-141.  Sometime in 1895 or 1896 they stopped making pintype insulators. May 2, 1893: Ralph G. Hemingray patented drip points.  The intent was to provide a point for moisture to accumulate and more quickly drip off the insulator keeping it dryer.  This date is considered significant as drip points were so widely implemented.  (US Patent 496,652) -- [Full Patent Text] August 29, 1893:  George W. Blackburn of Palmyra, NJ patented an insulator design using a bail clamp to hold the conductor wire.  This patent was implemented in CD 141.6 (US Patent 504,059) -- [Full Patent Text] August 14, 1894:  George H. Winslow of Pittsburgh Pennsylvania patent for a unique series of oil cup insulators for high voltage use.  This patent appears to have been implemented in several rare insulator styles including  CD 180, CD 180.1 and CD 244.  (US Patent 524,659) -- [Full Patent Text] -- (Additional Patent Image). September 25, 1894:  David N. Osyor patent for a pin and insulator combination that was assigned to the Jeffery Mfg. Co.  This was implemented in the CD 185 Mine insulator and porcelain U-89 through U-98B.  (US Patent 526,498) -- [Full Patent Text] 1895: The first underground trolley system in the United States is constructed in Boston, MA.  This system used relatively low voltage DC which required very large copper cables.  The CD 140 "Jumbo" was designed for this line. September 3, 1895:  Danial Rothenberger patent for a unique cable style insulator with a hole through the crown perpendicular to the tie wire.  This patent was implemented in the rare Brookfield CD 268.  (US Patent 545,819) -- [Full Patent Text] February 12, 1896: "China Glass & Lamps" reports the new glass works being erected at Westport, Md., by the Baltimore Glass Mfg. Co., is nearing completion.  Later reports show production started by the end of March making Screw cap ware, fruit jars and electrical supplies. -- Their insulators are marked B.G.M.Co. and are mostly found in purple glass. April 7, 1896:  Hannibal W. Rappleye patent for a bail-clamp tie arrangement to hold the conductor.  This patent was implemented by Brookfield in the rare CD 134.6 (US Patent 557,881) -- [Full Patent Text] September 28, 1897:  Fred Locke patent for a power insulator with an oblong shape and side troughs to direct water away from splashing on the crossarm.  This patent was implemented in the U-937 insulators that Locke had Imperial Porcelain make for use on the Niagara to Buffalo power line.  (US Patent 590,806) -- [Full Patent Text] March 8, 1898:  John W. Boch patent for a three piece porcelain power insulator where the three shells were fused together with extra glaze.  This was implemented in the Classic Thomas styles U-928 and U-928A.  (US Patent 600,475) -- [Full Patent Text] June 7, 1898:  Ralph D. Mershon of Colorado patent covering a power insulator design with a far extended inner petticoat and ridges on the top skirt to direct water off the insulator.  This patent was implemented in CD 288 and CD 298 as well as U-938, U-944 and U-945.  (US Patent 605,256) -- [Full Patent Text] September 3, 1898: A British patent by Daniel Sinclair and William Aitken both of Oxford Court, London patent for a two part dry spot insulator implemented in U-1925,U-1929, and U-1929A. (UK Patent 25,816 of 1897) -- [Full Patent Text] September 19, 1899:  Frederick H. Withycombe of Montreal, Canada patent  for a various ridge designs on the outside of an insulator to provide a "cushion" to damage from projectiles (ie: thrown rocks).  This first patent illustrates horizontal ridges.  He released four very similar Letters Patents and two design patents for virtually the same ideas.    Horizontal ridges are found on a number of Canadian CD 143's.  (US Patent 633,173) -- [Full Patent Text] 1900:  An eight mile elevated section of Boston's transit system was constructed.  Heavy DC cables were required and this line used CD 267 and CD 267.5 insulators without tie wires.  The weight of the cable was sufficient to hold it in place below  the tracks. June 10, 1902:  Vernon G. Converse patent for a stacking insulator.  This patent was implemented in the amazing glass insulator comprising CD 317.8, two CD 313 sleeves, and one CD 313.1 sleeve.  (US Patent 701,847) -- [Full Patent Text] April 7, 1903:  Ferdinand W. Gregory of New York, NY patent for a square wire groove providing extra support for the conductor.  This was implemented on the scarce Brookfield CD 159.    (US Patent 724,848) -- [Full Patent Text] May 19, 1903:  Fred M. Locke patent for the design of the M-2795 insulator.  (US Patent 728,805) -- [Full Patent Text] November 17, 1903:  Edward F. Schoethaler of Longbranch, NJ patent for a unique insulator design.  The drawings look very similar to the recently found "Spaceman" CD - The intent was to provide extra protection from a wire coming undone which may indicate that this idea influenced  the rare CD 139 Brookfield "Combination Safety" insulator.  (US Patent 744,631) -- [Full Patent Text] April 26, 1904: Scott Cutter patents the unusual CD 1038 glass Cutter tree insulator. (US Patent 758,175) -- [Full Patent Text] March 24, 1908:  Leonard W. Storror of San Francisco, CA patent for an insulator with an insert to improve insulation by making a better barrier to moisture.  This was implemented in the Brookfield CD 211 "No Leak" insulator.  (US Patent 882,803) -- [Full Patent Text] April 6, 1909: Charles E. Eveleth of Schenectady, NY patent for a porcelain power insulators with skirt grooves to allow pieces to break off if hit by a projectile preventing the loss of the whole insulator.  This patent was implemented in the rare M-2202 and M-2202A porcelain power insulators.  (US Patent 917,031) -- [Full Patent Text] March 19, 1910: The Hemingray Glass Company received Trade Mark No. 79,096: “HEMINGRAY” for use on ‘electric, telegraph, telephone, cable, street-railway, and floor insulators and break-knobs of glass.’ It was noted that the trade mark had been in use for 10 years.  Link for additional Hemingray information. January 16, 1912:  John Hilliard Jr. and Charles E. Parsons of Glens Falls, NY patent for a unique rigid suspension insulator made with multiple insulating shells mounted on a rod with two metal ends.  This is quite likely the patent for the recently found suspension insulators made from five CD 314 Hemingray shells.  (US Patent 1,015,229) -- [Full Patent Text] August 11, 1914:  Benjiman S. Purkey of Tacoma, WA patent for a twist lock "No Tie" porcelain insulator.  This patent is implemented in U-186.  Although unmarked, the recently discovered CD 207.5 may also have been made to this patent.  (US Patent 1,107,111) -- [Full Patent Text] Sept. 18, 1917:  Louis Fort of Jersey City, N.J. patent for a porcelain and metal two piece clamp insulator for street light drops.  These unusual insulators were made in brown porcelain with a cast metal clamp and mounting. (US Patent 1,240,330) -- [Full Patent Text] February 26, 1929:  Rufus Gould of New York, NY patent for a dry spot insulator assigned to the Postal Telegraph Co.  This patent was implemented in Whitall Tatum CD 182 and porcelain styles U-173, U-174, and U-175.  It called for a large inner skirt gap where the drop wire could be potted to keep wetness out.  (US Patent 1,703,853) -- [Full Patent Text] April 9, 1929:  Leon T. Wilson of East Orange, NJ assigned to A.T.& T. CO.  patent for a low loss glass insulator design.  This patent was implemented in Whitall Tatum CD 176 and the recently discovered Hemingray version CD-176.5.  (US Patent 1,708,038) -- [Full Patent Text] June 22, 1937:  Bentley A. Plimpton of Victor, NY patent for a porcelain high voltage insulator with additional petticoats and flanges.  This patent was implemented in the porcelain "Hi-Top" series of insulators (U-782 through U-805) as well as glass styles CD 220 and CD 221.  (US Patent 2,084,866) -- [Full Patent Text] November 16, 1937: Donald H. Smith assigned to the Western Union Telegraph Co. patent for a metal insulator shield to go around the base of a CD 154 style insulator.  I have seen these in use on Canadian dominion CD 154's.  (US Patent 2,099,540) -- [Full Patent Text] July 11, 1939:  H.H. Wheeler assigned to Western Union Telegraph Co.  patent for a low loss telegraph insulator.  This patent was implemented in CD 122.4 by Corning and Hemingray.  Of more interest, this patent covers the carnival glass coating used on many of the telegraph styles including the CD 118, 142 and 142.4.  It states that the coating increased the surface resistance of the insulator, thereby improving its performance in damp weather. (US Patent 2,165,773) -- [Full Patent Text] October 15, 1940:  D.H. Smith of the Western Union Telegraph Co. patent for a threaded rubber insulator.  This patent was implemented in the smaller Continental Rubber Works insulators.  (US Patent 2,218,497) -- [Full Patent Text] January 8, 1946:  Alwin G. Steinmayer of Milwaukee, WI patent for a combination insulator and spark gap arrestor.  This patent was assigned to the Line Material Company and was implemented in Hemingray insulator CD 186.1 and CD 186 and CD 186.2 were likely similar experimental pieces.  (US Patent 2,392,342) -- [Full Patent Text] November 30, 1948:  Rogers Case patented a mid-span transposition bracket as used with the Owens Illinois CD 1049 insulators.  (US Patent 2,455,229) -- [Full Patent Text] October 30, 1962:  William F. Markley and James L. Slater patent covering the design of several insulator styles made of rubber.  This patent was assigned to the Western Union Telegraph Co.  Several styles made by the Continental Rubber Works match this patent.  (US Patent 3,061,667) -- [Full Patent Text]
    Jul 19, 2010 135060
  • 12 Oct 2012
    There is a frenzy going on amongst the Denver Brass Armadillo Antique Mall venders this week....and as well there should be!   We had more great success with the Classified Listing Program within the Mall.  It brought in some really great sales and got multiple venders excited about getting their own items posted and up on the internet.   Back in May of 2012 a couple of venders came to me and asked me to post an item that they had stored in one of our back rooms.  The item was too large for them to display in their space in the Mall, but depite its size and "unique vibe", we knew that the item would make the right buyer a happy camper....if we could only find them, or better yet, help them find us!     This 1920's antique medical exam table is oak with all the fixings:  2 sets of stir-ups, the original leather, height & foot adjustments,  blood pan and 4 pass through drawers.   The item was originally listed on May 2, 2012 and reposted approximately every 60 days with no success in finding a buyer for this unique item. But just after reposting it at the end of September, a couple of gentlemen came into the Mall and asked us to pull the table out of storage.  They looked it over and happily took it home with them on Wednesday of this last week.    As if this weren't already a great enough story.....    Shortly after I was asked to post the medical exam table, the same set of venders asked if I could come out to their shop and storage unit and list some additional  items that they wanted to sell.  Due to the collectability, rarity & value of the items, I happily obliged.  Again, I continued to repost the items as they expired and just this last Tuesday, after reposting it just two days before, we received a call from an interested buyer for this beautiful quarter sawn oak Early Murphy Bed with desk and beveled mirror.     People, I have seen this happen time and time again.  I'll list an item and nothing happens, but then I'll repost it and we make a connection.  It's all a matter of finding that one person and what better way to do that than by listing your items and being persistent.        Amie Martin Social Networking Coordinator Denver Brass Armadillo Antique Mall
    42186 Posted by Denver Brass Armadillo
  • There is a frenzy going on amongst the Denver Brass Armadillo Antique Mall venders this week....and as well there should be!   We had more great success with the Classified Listing Program within the Mall.  It brought in some really great sales and got multiple venders excited about getting their own items posted and up on the internet.   Back in May of 2012 a couple of venders came to me and asked me to post an item that they had stored in one of our back rooms.  The item was too large for them to display in their space in the Mall, but depite its size and "unique vibe", we knew that the item would make the right buyer a happy camper....if we could only find them, or better yet, help them find us!     This 1920's antique medical exam table is oak with all the fixings:  2 sets of stir-ups, the original leather, height & foot adjustments,  blood pan and 4 pass through drawers.   The item was originally listed on May 2, 2012 and reposted approximately every 60 days with no success in finding a buyer for this unique item. But just after reposting it at the end of September, a couple of gentlemen came into the Mall and asked us to pull the table out of storage.  They looked it over and happily took it home with them on Wednesday of this last week.    As if this weren't already a great enough story.....    Shortly after I was asked to post the medical exam table, the same set of venders asked if I could come out to their shop and storage unit and list some additional  items that they wanted to sell.  Due to the collectability, rarity & value of the items, I happily obliged.  Again, I continued to repost the items as they expired and just this last Tuesday, after reposting it just two days before, we received a call from an interested buyer for this beautiful quarter sawn oak Early Murphy Bed with desk and beveled mirror.     People, I have seen this happen time and time again.  I'll list an item and nothing happens, but then I'll repost it and we make a connection.  It's all a matter of finding that one person and what better way to do that than by listing your items and being persistent.        Amie Martin Social Networking Coordinator Denver Brass Armadillo Antique Mall
    Oct 12, 2012 42186
  • 29 Oct 2010
  • 16 Oct 2014
    This week's show is entitled, "The Importance of Provenance," but maybe it would be better to say "The Joy of Provenance." If you like antiques, you probably enjoy history, and what could be more interesting than researching your own possessions to establish a line of ownership thru the years? So, I've taken a few pieces that I own and some that I see for sale in the Mall, and show how I was or was not able to establish ownership back to when the pieces were made. In every case the attempt was worth the effort, even if the chain is broken in some places. I do this more for myself than for any future owner, but I do think that buyers enjoy knowing the most they can about whatever they buy. I did a show a few years ago entitled, "People Buy Stories," which is in the Videos section, and in it I give a few examples of how histories can give value to objects. Hope you can join us at the usual time on Sunday evening, 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT for this week's shows. Gary
    19520 Posted by Gary & Carol Stover
  • This week's show is entitled, "The Importance of Provenance," but maybe it would be better to say "The Joy of Provenance." If you like antiques, you probably enjoy history, and what could be more interesting than researching your own possessions to establish a line of ownership thru the years? So, I've taken a few pieces that I own and some that I see for sale in the Mall, and show how I was or was not able to establish ownership back to when the pieces were made. In every case the attempt was worth the effort, even if the chain is broken in some places. I do this more for myself than for any future owner, but I do think that buyers enjoy knowing the most they can about whatever they buy. I did a show a few years ago entitled, "People Buy Stories," which is in the Videos section, and in it I give a few examples of how histories can give value to objects. Hope you can join us at the usual time on Sunday evening, 5PM PDT, 6PM MDT, 7PM CDT, 8PM EDT for this week's shows. Gary
    Oct 16, 2014 19520
  • 28 Jan 2011
    Check out this link for all the fabulous information! I have been to this sale/show several times and it hits it out of the park everytime! http://www.catspajamasproductions.net/ When you get to the site click on UPCOMING SHOWS to see all the details! Perhaps I will see you there.  
    15860 Posted by Machelle Bryan
  • Check out this link for all the fabulous information! I have been to this sale/show several times and it hits it out of the park everytime! http://www.catspajamasproductions.net/ When you get to the site click on UPCOMING SHOWS to see all the details! Perhaps I will see you there.  
    Jan 28, 2011 15860
  • 31 Aug 2011
    Large sculptures of four famous composers were an extraordinary find at auction for Dana Jensen, Vender 1, at the Brass Armadillo Antique Mall in Denver.  They measure up to 27 inches tall and weigh as much as 90 lbs.  These sculptures were created by sculptor & pianist Wee Wuone Park, a Korean student at the University of Wyoming, and unveiled at a classical music concert in 1959.  Along with the original sculptures, Mr. Jensen also purchased hundreds of classical vinyl records.  Taped to the front of one of the record sleeves was a program of the concert with a photograph of Wee Park sitting at his piano and three of the four busts in the background.  Inside the sleeve was an LP record of that concert/unveiling in 1959.  In reviewing the program, Mr. Jensen made a discovery that helped him to realize how extraordinary his find was.   Printed within the program is a dedication by Wee Park to Robert Russin, "Distinguised Sculptor and Inspiring Teacher".  Robert Russin was not only a University of Wyoming professor where he taught Wee Park, but he was also an American sculptor and artist known for a number of public sculptures including the giant bust of Abraham Lincoln located near Laramie, Wyoming.  The bust of Lincoln and Park's busts were created in 1959.  The similarities of the work of teacher and student are remarkable.   The sculpted busts of Rachmaninoff, Bach and Beethoven have now found a resting place on display in what was referred to by another vender as the Denver Brass Armadillo's very own "Culture Corner".  This "Culture Corner" comes complete with beautiful display boxes created by the General Manager, Scott Gottula, and the music of the composers playing in the background.    The Beethoven bust, originally sculpted with terra-cotta clay, has been cast in bronze by the world famous foundry, Broze Services Inc., in Loveland, Colorado.  Rachmaninoff, Bach and Brahms have not yet been cast.  The Beethoven bronze is currently for sale.  For more information on this piece or for future castings of the other three originals, please contact Dana Jensen at 720-878-2893 or the Brass Armadillo Antique Mall in Denver at 1-877-403-1677. 
    15254 Posted by Amie Martin
  • Large sculptures of four famous composers were an extraordinary find at auction for Dana Jensen, Vender 1, at the Brass Armadillo Antique Mall in Denver.  They measure up to 27 inches tall and weigh as much as 90 lbs.  These sculptures were created by sculptor & pianist Wee Wuone Park, a Korean student at the University of Wyoming, and unveiled at a classical music concert in 1959.  Along with the original sculptures, Mr. Jensen also purchased hundreds of classical vinyl records.  Taped to the front of one of the record sleeves was a program of the concert with a photograph of Wee Park sitting at his piano and three of the four busts in the background.  Inside the sleeve was an LP record of that concert/unveiling in 1959.  In reviewing the program, Mr. Jensen made a discovery that helped him to realize how extraordinary his find was.   Printed within the program is a dedication by Wee Park to Robert Russin, "Distinguised Sculptor and Inspiring Teacher".  Robert Russin was not only a University of Wyoming professor where he taught Wee Park, but he was also an American sculptor and artist known for a number of public sculptures including the giant bust of Abraham Lincoln located near Laramie, Wyoming.  The bust of Lincoln and Park's busts were created in 1959.  The similarities of the work of teacher and student are remarkable.   The sculpted busts of Rachmaninoff, Bach and Beethoven have now found a resting place on display in what was referred to by another vender as the Denver Brass Armadillo's very own "Culture Corner".  This "Culture Corner" comes complete with beautiful display boxes created by the General Manager, Scott Gottula, and the music of the composers playing in the background.    The Beethoven bust, originally sculpted with terra-cotta clay, has been cast in bronze by the world famous foundry, Broze Services Inc., in Loveland, Colorado.  Rachmaninoff, Bach and Brahms have not yet been cast.  The Beethoven bronze is currently for sale.  For more information on this piece or for future castings of the other three originals, please contact Dana Jensen at 720-878-2893 or the Brass Armadillo Antique Mall in Denver at 1-877-403-1677. 
    Aug 31, 2011 15254